Our Industrial Bolt On pads are excellent for cultured marble and fiberglass buffing. The heavy duty backing allows you to run at high RPM applications. Not for automotive use.
Diameter: 7.5″
Pile Height: 1.5″
Mounting: Bolt On
Material Type: 100% Wool 4ply Twist
Material Color: Natural
Application: Compounding
Suggested RPM: 1750 – 2400
4" White Foam Grip Pad for Dual Headed Polisher
ADD TO CART
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: White
Application: Ultra Finishing
Foam PPI: 90
Thickness: 1″
TRI PACK BUFF KIT No. TP-4 includes four pads a backing plate and two adapters. The four pads are #301G for heavy compounding, #301GY for medium compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic polisher. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
Diameter: 3″
Pile Height: 1/2″
Material Type: 100% 4Ply Twisted Wool
Mounting Type: Grip Pad
Application: Compounding
Suggested RPM: 1750 – 2200
301GY
?Diameter: 3″
Pile Height: 1/2″
Material Type: Wool Blend 4Ply Twist
Mounting Type: Grip Pad
Application: Lt. Cut/Polishing
Suggested RPM: 1400 – 1600
330G
?Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Polishing
Suggested RPM: 1120 – 1750
Thickness: 1″
320G
Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Finishing
Suggested RPM: 1200 – 1500
Thickness: 1″
358
Diameter: 3″
Mounting Type: Grip Pad
Thickness: 1/4″
Thread: 5/8 x 11″
Max RPM: 3000
DA5816
Thread of Side 1: 5/16″ x 24″
Thread of Side 2: 5/8″ x 11″
SP5814
Thread of Side 1: Drill Chuck
Thread of Side 2: 5/8″ x 11″
1" Uro-Tec Soft White Finishing Foam Pad
Loop diameter: 1.375″
Foam thickness: .750″
Made in the USA
Patent Pending dual fiber stitch
Strongest interface foam on the market
Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
Not recommended for a High-Speed/Rotary polisher
Clean with soft nylon brush or compressed air per buffing cycle
Able to cut, polish and finish on soft paints
Washable
Available in 6, 5, 3 diameters
If you like the overall performance and versatility of Buff and Shines Uro-Fiber pads (with the black and white fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call The Uro-Fiber Twins. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 1 inch Buff and Shine Uro-Fiber Pads with a 1 inch backing plate.
4" Yellow Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Un-Reticulated Polyester Foam
Material Color: Yellow
Application: Cutting
Foam PPI: N/A
Thickness: 1″
4" Black & Black Micro Fiber Finishing Grip Pad
Buff and Shine Micro fiber buffing pads are manufactured with precision in the USA using only the finest foam and micro fiber material. Buff and Shine Microfiber pads have beveled edges for FAST and EASY pad centering. Unique, back and plush micro fiber pad material is safe for both cutting and finishing applications. Buff and Shine Microfiber pads are built for maximum performance and long lasting durability on rotary and DA polishers.
Face Dia: 4″
Loop Dia: 3.5″
Application: Polishing & Finishing
Our 3″ Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
Diameter: 3″
Pile Height: 1/2″
Mounting: Grip Pad
Material Type: Wool Blend 4Ply Twist
Material Color: Yellow
Application: Light Cut/Polishing
Suggested RPM: 1750 – 2400
3" Uro-Tec Coarse Blue Heavy Cutting Foam Pad
Loop diameter: 3″
Foam thickness: .750″
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
3 inch Buff and Shine Uro-Fiber Pad can be used with a 2 or 3 inch backing plate.
© Copyright 2019. All Rights Reserved. 
