Perl Applicator
Our curved Tire applicator mimics the shape of the tire allowing you to easily apply Perl to your tires.
Related Products
-
Reload
Reload packs the glass-like gloss, hydrophobicity and dirt repellency of Silica Nanotechnology in a convenient spray-on, wipe-off sealant. Originally formulated to maintain the protection and finish quality of CQuartz coatings, Reload has also proven itself as a stand-alone sealant, where it can offer up to 4-months of protection on daily drivers. Reload?s easy to use waterborne formula can be applied to all vehicle surfaces, and even on damp surfaces, making it perfect for quickly topping up your vehicle?s protection and shine.
Sizes: 100mL, 500mL, 1L, 5L
Waterborne Silica Spray Sealant
Up to 4+ Months of Protection on All Vehicle Surfaces
Adds Gloss, Hydrophobicity and Dirt Repellency -
Fat Boa- Microfiber Dry Towel
The safest & softest way to dry your car after washing. our unique Boa microfiber blend 80/20 with 800 GSM ,double side ?super thick and absorbing towel. no dragging water lines while drying, stay soft and safe after many time washing, availble in 2 sizes : 35x60cm and 70x80cm, Made in Korea
-
CQuartz UK 3.0
Based on the original CQuartz technology. CQuartz UK was developed in the United Kingdom for use in cold, damp climates where most nanotechnology coatings typically struggle. A new fast flashing carrier was used to enhance curing in difficult conditions, and the silica-quartz content was increased to a scarcely believable 70% creating an even harder and purer glass layer. These enhancements allowed CQ UK to be easily applied in temperatures as low as 41-degrees Fahrenheit (5-Degrees Celsius), with even higher levels of beauty and protection, making it the unofficial pinnacle of our consumer CQuartz line.
CQuartz UK Edition 3.0!
With improved gloss, improved water behavior and improved chemical resistance? in short we?ve improved it in every possible way!We know you love CQuartz UK edition performance, now we?ve increased the resistance to road salt build up, while keeping the same great chemical resistance of pH 3~14 inclusive!
We listened to you when you told us it had to be easy to use, this added a few extra months to our process but we know you?ll love it. For the first time ever CQuartz UK 3.0 is easy from 3C up to 40C!
Keeping with the classic CQuartz UK wipe on wipe off application it can be buffed immediately or left on few minutes while still buffing off super clean and easy. For enthusiastic car lovers or Pro detailers, both same most easy to use coating without sticky surface or grabby wipe off!As you would expect from CarPro we?ve stuck to our ethos, of under promising and over delivering so as with all our coatings we will give you a conservative real world durability, in this case it?s 18-24 months on CQuartz UK Edition 3.0.
Sizes: 10mL, Kit 30mL, Kit 50mLQuartz Nanotechnology Coating
70% Silica-Quartz with 99.99% Purity
Suitable for Cold or Hot-Climates !
Super easy to wipe off ? non sticky surface
Acid and base chemical resistance 3~14 pH
Salt resistance -
Gliss ? Hyper slick top coating
CarPro GLISS
The Next Generation Hyper Slick Top Coat
Make your own bliss? Slide through gloss into GLISS!
If I were to ask you what two factors fill every true car care enthusiast with happiness, what would you say? For most it is the gloss and incredible feeling of a perfect slick smooth and pure finish! THAT is the essence of GLISS?
With GLISS, CarPro brought new advances in nanotechnology to bare and designed an all-new hyper-smooth, hyper-glossy, and easy to apply ceramic nano coating that excels as a top-coat for all CQuartz coatings!
Utilizing modified long chain carbon fluorine polymers and enhanced nano-technology, GLISS provides increased resistance to, static buildup, dust retention, and many types of mineral and water stains!
This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!
Features:
Hyper SLICK and smooth
Next Generation Top Coat!
Also works great as a stand-alone Nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Extreme Hydrophobic effect
Enhances Gloss and life of any ceramic coatingDIRECTIONS:
Surface must be very dry per coating.
Drag one line of product across length of suede wrapped applicator.
Apply evenly across surface
Approximately 24? Sq (60cm2) at a time.
Add more product to applicator as needed to keep a wet, even
application.
Wait until white haze forms and immediately wipe all residues off using a microfiber.
If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.
Total cure time: 12 hours.
Tips for use as top coat on CQuartz:
May be applied 4 hours or longer after CQuartz.
If CQuartz was IR cured then only 1 hour is needed.
GLISS may flash slightly faster when applied over CQuartz.
Maintenance: Wash regularly with CarPro Reset or Ech2o.
Durability: 6-12 Months.
Storage : 15~ 35 deg.C ( 60 ~ 95 F.)
Important! If product is stored below this temp and becomes gel then it must be warmed up to reactivate.
-
Clays
Offered in 3 grades our Detailing Clay deeply cleans painted and glass surfaces and removes a variety of contaminants including tree sap, bug residue, paint overspray, road tar, rail dust and mineral deposits. It is even safe to use on chrome, glass, and fiberglass! All our clays are paint safe when used properly with our claying lubricant.
Spec. Info: 1 pack: 3x100gram.
-
Merino Wool Wash Mitt
The CarPro Merino Wool Wash Mitt is the ultimate in luxurious gentle auto wash tools and is a must have for anyone who loves their vehicle or cares for their quality of work they provide on others! Our CarPro Wool Wash Mitt is specifically designed to offer all of the benefits of 100% Merino Wool without the drawbacks of other wool mitts. For those that like to be able to get in and out of the mitt without using your other hand this is a great feature. At the same time the mitt never slips off on it?s own. Another benefit of this design is the pocket doesn?t rob wash solution at each visit to the bucket. The stitching of this hand pocket is extremely durable.
Spec. info ? 100% natural merino sheep skin.
15cm. X 25cm.
wool length 6~8cm.
weight : ~ 100gram. -
CarPro Gloss Pad
Our new Gloss pad Orbital Foam feature a dual-density design, maintains optimum surface contact for even pressure. The polyurethane open cell foam ,ultra soft 90ppi density foam, ensure super gloss polishing in finishing stage, It has very little cut and will apply thin, even coats of waxes, sealants, and fine polishes as our Reflect polish. The concave shape increase stability allows improved control on curved panels and edges.
Spec. Info:
Beveled Edge for structural stability
Soft Open Cell Foam
Japanese Foam
Self Centering Hole in Center
Reveals a high gloss finish -
CarPro Cool Pad
A unique lambs wool and microfiber hybrid buffing pad with a patented design. A highly resilient, integrated air-cooling 3D structure acts as a breathing layer and combines pressure relief, thermoregulation and moisture management in one high tech composed, finished product. Developed from a pure New Zealand wool/microfiber woven material backed up with a backing pad which serves as a cooling interface between the surface and the machine. The functional layer of air space results in multiple benefits and ultimate polishing results. Target: cutting/compounding.
Spec Info
Size: 3/5 inches.
Material: wool+MF
Foam hardness: 600kpa.
Cells size: n/a
Foam density: 1.2kg/ -
CarPro Velvet Polishing Pad
With our CarPro Velvet Orange Peel Removal pads you can now remove or substantially reduce orange peel in the top layer without sanding. While removing orange peel and deep defects you are also polishing the paint rather than leaving sanding marks which reduces the steps needed afterwards. Target: paint orange peeling 2000/3000 remover.
Spec. Info:
Size: 5 inches.
Material: polyester/velvet
Foam hardness: 3kpa.
Cells size: 80ppi.
Foam density: 30kg/m3 -
FlyBy Forte
FlyBy Forte is a brand new technologically advanced windshield coating. Development of Flyby Forte was heavily based on the latest and most advanced mobile phone anti-scratch protection. Our inorganic Nano-tech coating was specifically designed for EXTREME semi-permanent durability and long-term resistance to abrasion and chemicals. Flyby Forte was tested to over 40,000 real time wiper cleaning cycles, is UV stable, highly chemical resistant, and provides resistance to scratches and minor chips. Flyby Forte is the ULTIMATE in windshield and glass coatings!
Sizes: 15mL, Kit 15mL, 50mL
No degradation of the glass
Slide off at 50 Km/h
Up to 2 years durability
© Copyright 2019. All Rights Reserved.