6″ Uro-Tec Coarse Blue Heavy Cutting Foam Pad
Loop diameter: 5″
Foam thickness: 1″
Face diameter: 6″
Polisher recommendation: 15mm Long Throw D.A.
Loop diameter: 5″
Foam thickness: 1″
Face diameter: 6″
Polisher recommendation: 15mm Long Throw D.A.
2" Uro-Tec Soft White Finishing Foam Grip Pad
Loop diameter: 2.125″
Foam thickness: .750″
Buff and Shine Uro-Fiber Pads are designed to fully maximize the detailing potential already seen in microfiber pads. With a 25% lower pile than traditional microfiber pads, Buff and Shine Uro-Fiber Pads also feature a blend of two different microfiber grades into just one pad. These two features, never before seen in a microfiber pad, allow you to cut, polish and finish in just one step!
While the black and white fibers found in the Buff and Shine Uro-Fiber Pads lead to an overall attractive appearance, they are for so much more than just looks. With both cutting fibers and polishing fibers blended together into one pad, you are now able to remove light to moderate scratches and swirls, polish to perfection, and buff to a high shine in just one pad! Although, of course, you will need a clean pad for each step.
Use 2 inch Buff and Shine Uro-Fiber Pad with a 2 inch backing plate.
2" Uro-Tec Coarse Blue Heavy Cutting Foam Pad
Loop diameter: 2.125″
Foam thickness: .750″
2" Uro-Tec Yellow Polishing Foam Pad
Loop diameter: 2.125″
Foam thickness: .750″
4" Blue Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Blue
Application: Lt. Polishing
Foam PPI: 70
Thickness: 1″
1" Uro-Tec Coarse Blue Heavy Cutting Foam Pad
Loop diameter: 1.375″
Foam thickness: .750″
2" Uro-TecMaroon Medium Cut/Heavy Polishing Foam Pad
Loop diameter: 2.125″
Foam thickness: .750″
3" Uro-Tec Yellow Polishing Foam Pad
Loop diameter: 3″
Foam thickness: .750″
4" Yellow Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Un-Reticulated Polyester Foam
Material Color: Yellow
Application: Cutting
Foam PPI: N/A
Thickness: 1″
Our 3″ Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
Diameter: 3″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Black
Application: Finishing
Foam PPI: 80
Thickness: 1″
Suggested RPM: 1200 – 1750