6″ Uro-Cell Blue Heavy Cutting Foam Grip Pad
Loop diameter: 5″
Foam thickness: 1″
Face Diameter: 6″
Polisher recommendation: Gear Driven D.A., Standard D.A. & High-Speed
Loop diameter: 5″
Foam thickness: 1″
Face Diameter: 6″
Polisher recommendation: Gear Driven D.A., Standard D.A. & High-Speed
Our 3″ Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
Diameter: 3″
Pile Height: 1/2″
Mounting: Grip Pad
Material Type: Wool Blend 4Ply Twist
Material Color: Yellow
Application: Light Cut/Polishing
Suggested RPM: 1750 – 2400
4" Yellow Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Un-Reticulated Polyester Foam
Material Color: Yellow
Application: Cutting
Foam PPI: N/A
Thickness: 1″
2" Uro-Tec Soft White Finishing Foam Grip Pad
Loop diameter: 2.125″
Foam thickness: .750″
Our 3″ Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
Diameter: 3″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Black
Application: Finishing
Foam PPI: 80
Thickness: 1″
Suggested RPM: 1200 – 1750
TRI PACK BUFF KIT No. TP-4 includes four pads a backing plate and two adapters. The four pads are #301G for heavy compounding, #301GY for medium compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic polisher. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
Diameter: 3″
Pile Height: 1/2″
Material Type: 100% 4Ply Twisted Wool
Mounting Type: Grip Pad
Application: Compounding
Suggested RPM: 1750 – 2200
301GY
?Diameter: 3″
Pile Height: 1/2″
Material Type: Wool Blend 4Ply Twist
Mounting Type: Grip Pad
Application: Lt. Cut/Polishing
Suggested RPM: 1400 – 1600
330G
?Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Polishing
Suggested RPM: 1120 – 1750
Thickness: 1″
320G
Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Finishing
Suggested RPM: 1200 – 1500
Thickness: 1″
358
Diameter: 3″
Mounting Type: Grip Pad
Thickness: 1/4″
Thread: 5/8 x 11″
Max RPM: 3000
DA5816
Thread of Side 1: 5/16″ x 24″
Thread of Side 2: 5/8″ x 11″
SP5814
Thread of Side 1: Drill Chuck
Thread of Side 2: 5/8″ x 11″
2" Uro-TecMaroon Medium Cut/Heavy Polishing Foam Pad
Loop diameter: 2.125″
Foam thickness: .750″
3" Uro-Tec Yellow Polishing Foam Pad
Loop diameter: 3″
Foam thickness: .750″
3" Uro-TecMaroon Medium Cut/Heavy Polishing Foam Pad
Loop diameter: 3″
Foam thickness: .750″
4" Black Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Black
Application: Finishing
Foam PPI: 80
Thickness: 1″
TRI PACK BUFF KIT No. TP-3 includes three pads a backing plate and two adapters. The three pads are #301G for heavy compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic machine. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
Diameter: 3″
Pile Height: 1/2″
Material Type: 100% 4Ply Twisted Wool
Mounting Type: Grip Pad
Application: Compounding
Suggested RPM: 1750 – 2200
330G
?Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Polishing
Suggested RPM: 1120 – 1750
Thickness: 1″
320G
Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Finishing
Suggested RPM: 1200 – 1500
Thickness: 1″
358
Diameter: 3″
Mounting Type: Grip Pad
Thickness: 1/4″
Thread: 5/8 x 11″
Max RPM: 3000
DA5816
Thread of Side 1: 5/16″ x 24″
Thread of Side 2: 5/8″ x 11″
SP5814
Thread of Side 1: Drill Chuck
Thread of Side 2: 5/8″ x 11″