CarPro GLISS

The Next Generation Hyper Slick Top Coat

Make your own bliss? Slide through gloss into GLISS!

If I were to ask you what two factors fill every true car care enthusiast with happiness, what would you say? For most it is the gloss and incredible feeling of a perfect slick smooth and pure finish! THAT is the essence of GLISS?

With GLISS, CarPro brought new advances in nanotechnology to bare and designed an all-new hyper-smooth, hyper-glossy, and easy to apply ceramic nano coating that excels as a top-coat for all CQuartz coatings!

Utilizing modified long chain carbon fluorine polymers and enhanced nano-technology, GLISS provides increased resistance to, static buildup, dust retention, and many types of mineral and water stains!

This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!

Features:

Hyper SLICK and smooth
Next Generation Top Coat!
Also works great as a stand-alone Nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Extreme Hydrophobic effect
Enhances Gloss and life of any ceramic coating

DIRECTIONS:

Surface must be very dry per coating.

Drag one line of product across length of suede wrapped applicator.

Apply evenly across surface

Approximately 24? Sq (60cm2) at a time.

Add more product to applicator as needed to keep a wet, even

application.

Wait until white haze forms and immediately wipe all residues off using a microfiber.

If haze is left on too long then reapply and immediately wipe off.

If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.

Total cure time: 12 hours.

Tips for use as top coat on CQuartz:

May be applied 4 hours or longer after CQuartz.

If CQuartz was IR cured then only 1 hour is needed.

GLISS may flash slightly faster when applied over CQuartz.

Maintenance: Wash regularly with CarPro Reset or Ech2o.

Durability: 6-12 Months.

Storage : 15~ 35 deg.C ( 60 ~ 95 F.)

Important! If product is stored below this temp and becomes gel then it must be warmed up to reactivate.

One of our greatest innovations of all time (Hydro2) has now evolved to save you even more time then before!
Introducing the incredibly easy to use, effective, and revolutionary Hydro Foam! CarPro HydroFoam is a pH Neutral surfactant designed to gently lift and remove dirt from solid surfaces in both a safe and effective manner. HydroFoam was designed with a special lifting lubricant that not only allows the dirt to be lifted from the surface but also provides a lubricant to safely wash the paint when used as directed.
In the tradition of our Hydro2 line HydroFoam was formulated with Hydrophilic glass fibers, fluoropolymers and can be applied to all solid vehicle surfaces! Paint, glass, plastic, wheels, calipers, and wheel wells are all easily within reach with HydroFoam. This amazing rich foam wash and sealant in one lifts the dirt whilst in the Merino wiping stage and then during the rinse phase an ultra-water-repellent coating is immediately formed!
This results in a durable silica shell that produces a brilliant protected shine that is incredibly easy to maintain. Our ?Hydroelectric bonding? function means the pressure from spraying with water accelerates the bonding of the glass like shell to the surface creating a unique glossy coat that is resistant to nearly all acids, alkaline solutions, and solvents while offering significant UV protection.

Spec. Info:

Wash and Hydro2 Coat in one!
pH Neutral
Gently lifts dirt
Enhances the gloss, depth, and smoothness of your paint
Easy to use
Versatility: Use on many surfaces
Dirt and Water repellency: Dirt and water are repelled from the surface
Instant Vehicle Release: No cure time needed
Less wiping: With no more wiping and buffing waxes or sealants on and off the paint there is less chance of scratches.
UV Protection
Resistant to nearly all acids, alkaline solutions, and solvents
Gloss and Hydrophobic durability of 3 months or more

Directions:

Do NOT apply HydrOfoam in the sun or to a hot surface! Applying in this manner may cause streaks that do not wipe off easily.
In shaded location or shop rinse the vehicle well. Surface must be well cleaned from soap residue and left wet with water.
Dilute 1:9
Apply HydroFoam to car surface using Foam lancer or by hand.
Immediately wash with mitt (preferred Carpro Merino Wash Mitt)
Rinse the entire vehicle very well.
Finish by ?flood rinsing? the vehicle without a spray nozzle to push all the water off from top down.
Dry any remaining water by blowing off or with the use of a clean drying towel

FlyBy30?s advanced Silane barrier technology repels rain from automotive windscreen glass, enhancing visibility, and reducing the need for wipers at speeds above 30mph (45kmh). This significantly increases driver safety in bad weather, and also helps to reduce the adhesion of snow, ice, and bugs to all treated glass surfaces. FlyBy30 easily withstands windscreen wiper abrasion and regular cleaning, allowing the coating to continue protecting for in excess up to 6 months.

Sizes: 20mL, Kit 20mL, 50mL

Rain Repellent Glass Coating
Increases Visibility
Up to 6 Months Durability

Visibility should not be taken lightly, which is why we at CarPro have created Fog-Fight; a Superhydrophillic nanotechnology coating that prevents the formation of fog and mist on interior glass and mirrors. This coating?s unique surface structure prevents condensation from forming on all treated surfaces including windscreens, mirrors, and even optical glass to keep your vision clear. It?s time to bring the fight to fog!

Sizes: 100mL

Anti-Fog Agent
Increases Visibility
2-in-1 Cleaner/Coating