Loop diameter: 5″
Foam thickness: 1″
Face diameter: 6″
Polisher recommendation: 15mm Long Throw D.A.

Made in the USA
Patent Pending dual fiber stitch
Strongest interface foam on the market
Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
Not recommended for a High-Speed/Rotary polisher
Clean with soft nylon brush or compressed air per buffing cycle
Able to cut, polish and finish on soft paints
Washable
Available in 6”, 5”, 3” diameters
If you like the overall performance and versatility of Buff and Shine’s Uro-Fiber pads (with the “black and white” fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.

It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call “The Uro-Fiber Twins”. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.

Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.

Diameter: 6″
Mounting: Direct Mount
Material Type: Reticulated Polyester Foam
Material Color: Yellow
Application: Lt. Compounding/Polishing
Foam PPI: 50
Thickness: 2″
Thread: 5/8″ x 11″
Suggested RPM: 1200 – 1750

Loop diameter: 5″
Foam thickness: 1″
Face Diameter: 6″
Polisher recommendation: Gear Driven D.A., Standard D.A. & High-Speed

The most robust foam pads ever created!

Buff & Shine Low-Pro Large Throw Foam Pads will forever change your expectations for how long a foam pad should last. Constructed out of state-of-the-art foam formulations (Buff & Shine’s specialty), Buff & shine Low-Pro Large Throw Foam Pads were designed to withstand the massive orbit of large-throw polishers. If you’re sick and tired of going through a set of pads after each detail, Buff & Shine Low-Pro Large Throw Foam Pads will save you time and money.

Buff & Shine, an innovator in the car care foam technology industry, pulled out all the stops when developing their new line of Low-Pro Foam Pads. It’s apparent right away that Buff & Shine spent a great amount of time meticulously testing and redesigning each foam pad until it was absolutely perfect. These lightweight, robust foam pads utilize a new foam formulation that promises to outlast and outperform conventional foam pads on a large-throw random orbital polisher.

Benefits of Buff & Shine Low-Pro Large Throw Foam Pads:

Made in USA
New foam formulation prevents pad collapsing
Custom foam grades for quick defect removal
High heat resistant rubber interface
Engineered for perfect balance
Buff & shine Low-Pro Large Throw Foam Pads have an engineered rubber interface which is flame, fuel and oil resistant. This unique interface is what enables Buff & shine Low-Pro Large Throw Foam Pads to withstand the immense amount of heat created by large throw polishers. The interface also provides constant pressure to the surface being polished for consistent results.

Buff & shine Low-Pro Large Throw Foam Pads are available in the following configurations for all your buffing and polishing applications.

Green Extreme Cutting

The GREEN foam pad is constructed of a very coarse, dense sharp foam that is able to level severe defects on hard paint systems. Heavy swirl marks, scratches, type 3water spots and other paint imperfections will be effortlessly removed with this pad. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.

Orange Medium Cut/Polishing

The ORANGE foam pad is constructed out of a dense, sharp foam that is able to level moderate to heavy defects on hard paint systems. Swirls, light scratches, type 2 water spots and other paint imperfections will easily be removed with this pad. This pad is aggressive enough for most applications on factory clear coat systems. Always follow this pad with a less aggressive pad/polish combination to maximize gloss and surface smoothness.

Maroon Polishing

The MAROON foam pad is almost as dense as the orange foam pad, but it’s constructed out of a less aggressive foam that is perfect for refining a soft paint system to an extremely high gloss. The Maroon foam pad removes light swirl marks, holograms, clay-induced marring, and other light paint imperfections. This pad finishes exceptionally well considering the mechanical polishing ability that it provides.

Red Finishing

The RED foam pad is the softest foam pad in the Low-Pro system. It is designed for applying ultra-fine polishes, glazes, waxes and synthetic sealants. The Red foam pad will finish flawlessly on any paint system, creating an exceptionally glossy finish worthy of a show car.

Foam Dia: 6.5″
Loop Dia: 6″
Pad Thickness: .875″
Application: Extreme Cut

Our Direct Mount Foam Pads are made of durable open cell foam and the mounting plate has strong metal threads of durable construction.

Diameter: 6″
Mounting: Direct Mount
Material Type: Reticulated Polyester Foam
Material Color: Black
Application: Finishing
Foam PPI: 80
Thickness: 2″
Thread: 5/8″ x 11″
Suggested RPM: 1200 – 1750

Buff and Shine Mfg. is now manufacturing a full line of 5.5″ foam pads that fit the all DA polishers with a 5″ backing plate. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.

We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.

Our pads our consistently crisp and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.

A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.

When used with our backing plate number 500Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 5.5″
Thickness: 1″
Mounting: Grip Pad
Foam Color: White
Application: Heavy Polishing
Material Type: Euro Prepolymer Foam

Finding a simple to use self centering system has been the subject of many ideas and innovations in the reconditioning industry. The results have been scattered, until now. The benefits of finding a solution are clear: instant centering achieves vibration free buffing with less fatigue and a better result.

Our patent pending “Ring Pad” system does all this and more. Along with the centering benefit we have shaped the front of the pad with a hex design and engineered a flexible backing plate that will accept air, rotary and random orbit buffers; the hex face will help dissipate polish or compounds evenly, minimizing grabbing and reducing heat while the backing plate helps reduce pad stiffness. Each of our colored foam buffs has a measured cell structure that provides a different level of cutting or finishing. Used in conjunction with your favorite buffing medium, this is the ultimate buffing solution.

Ring pad patent# 8572797

Diameter: 7.5″
Thickness: 1.25″
Mounting: Grip Pad
Wool Type: 100% 4ply twisted
Application: Extra Heavy Cut

Finding a simple to use self centering system has been the subject of many ideas and innovations in the reconditioning industry. The results have been scattered, until now. The benefits of finding a solution are clear: instant centering achieves vibration free buffing with less fatigue and a better result.

Our patent pending “Ring Pad” system does all this and more. Along with the centering benefit we have shaped the front of the pad with a hex design and engineered a flexible backing plate that will accept air, rotary and random orbit buffers; the hex face will help dissipate polish or compounds evenly, minimizing grabbing and reducing heat while the backing plate helps reduce pad stiffness. Each of our colored foam buffs has a measured cell structure that provides a different level of cutting or finishing. Used in conjunction with your favorite buffing medium, this is the ultimate buffing solution.
Ring pad patent# 8572797

Hex pad patent# D684611

Diameter: 7.5″
Thickness: 1.375″
Mounting: Grip Pad
Foam Color: White
Application: Ultra Finish/Application
Material Type: Reticulated Polyester Foam

Our Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.

Diameter: 7.5″
Pile Height: 1.5″
Mounting: Grip Pad
Material Type: Wool Blend Single Ply
Material Color: Yellow
Application: Polishing/Finishing
Suggested RPM: 1200 – 1750

Loop diameter: 1.375″
Foam thickness: .750″