Our Recessed Foam Pads have quality hook & loop material for fast easy pad loading with a straight down recessed cup for extra protection. We have a wide range of durable open cell foams for all your buffing needs.
Diameter: 8″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Yellow
Application: Lt. Compounding/Polishing
Foam PPI: 50
Thickness: 2″
Suggested RPM: 1200 – 1750
Our 3″ Grip Wool Buffing Pads have quality hook & loop material with plush durable fibers along with strong and washable backing structure. We have a wide selection of wools and pile heights for all your application needs.
Diameter: 3″
Pile Height: 1/2″
Mounting: Grip Pad
Material Type: Wool Blend 4Ply Twist
Material Color: Yellow
Application: Light Cut/Polishing
Suggested RPM: 1750 – 2400
Made in the USA
Patent Pending dual fiber stitch
Strongest interface foam on the market
Built around the Gear-Driven DA, Long Throw DA and Standard DA polishers
Not recommended for a High-Speed/Rotary polisher
Clean with soft nylon brush or compressed air per buffing cycle
Able to cut, polish and finish on soft paints
Washable
Available in 6, 5, 3 diameters
If you like the overall performance and versatility of Buff and Shines Uro-Fiber pads (with the black and white fibers), but you felt like you needed just a bit more fine-finishing capability, then you will appreciate Uro-Fiber Finisher Pads. Buff and Shine listened to the feedback from end-users of Uro-Fiber pads and engineered a new microfiber pad with a standard pile height and shorter profile that provides great finishing results, especially on softer paints.
It is still possible to cut and finish with the Uro-Fiber Finisher pads, but most technicians will prefer to have the one-two punch we like to call The Uro-Fiber Twins. Start with the versatility of the Uro-Fiber pads for cutting and polishing, then bring the paint to an amazing finish with the Uro-Fiber Finisher.
4" Yellow Foam Grip Pad for Dual Headed Polisher
Buff and Shine Mfg. is now manufacturing a full line of 4″ foam pads that fit the Cyclo dual head polisher. The quality and craftsmanship of these new pads is far superior to anything on the market. Here is why.
VELCRO TRIM – We have taken the extra step to evenly trim the Velcro loop back from the outer edge of the pad to prevent accidental contact with the paint that could cause $100s or possibly $1000s in damages.
CRAFTSMANSHIP – Our pads our consistently crisply and cleanly cut. The side walls of the pad are perfectly straight down on every pad. Check your current stock and you will find inconsistent concaved sidewalls. This is due to incorrect cutting procedures. You will find every pad will look different.
ADHESIVE – A common problem with Velcro pads is the Velcro peeling off. We are using an adhesive that will never come off ever. It is heat resistant, chemical resistant and 100% fully washable over and over again. Remember when you buy Buff and Shine products we stand behind our products with a 100% guarantee.
When used with our backing plate number 350Y you get a numerous benefits aside from safety of the no exposed sharp edge you get a flexible backing plate foam pad combo which glides over automotive body style lines with ease.
Diameter: 4″
Mounting: Grip Pad
Material Type: Un-Reticulated Polyester Foam
Material Color: Yellow
Application: Cutting
Foam PPI: N/A
Thickness: 1″
1" Uro-TecMaroon Medium Cut/Heavy Polishing Foam Pad
Loop diameter: 1.375″
Foam thickness: .750″
3" Uro-Tec Coarse Blue Heavy Cutting Foam Pad
Loop diameter: 3″
Foam thickness: .750″
2" Uro-TecMaroon Medium Cut/Heavy Polishing Foam Pad
Loop diameter: 2.125″
Foam thickness: .750″
1" Uro-Tec Soft White Finishing Foam Pad
Loop diameter: 1.375″
Foam thickness: .750″
TRI PACK BUFF KIT No. TP-4 includes four pads a backing plate and two adapters. The four pads are #301G for heavy compounding, #301GY for medium compounding, #330G for polishing and #320G for finishing along with our grip backing plate #358. The two adapters are #DA5816 and #SP5814. The #DA5816 mounts in the grip backing plate #358 making a grip backing plate for a pneumatic polisher. The #SP5814 also mounts in the grip backing plate #358 making a grip backing plate for drill mount. The MINI TRI PAC BUFF KIT was designed for small buffing areas.
301G
Diameter: 3″
Pile Height: 1/2″
Material Type: 100% 4Ply Twisted Wool
Mounting Type: Grip Pad
Application: Compounding
Suggested RPM: 1750 – 2200
301GY
?Diameter: 3″
Pile Height: 1/2″
Material Type: Wool Blend 4Ply Twist
Mounting Type: Grip Pad
Application: Lt. Cut/Polishing
Suggested RPM: 1400 – 1600
330G
?Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Polishing
Suggested RPM: 1120 – 1750
Thickness: 1″
320G
Diameter: 3″
Material Type: Reticulated Polyester Foam
Mounting Type: Grip Pad
Application: Finishing
Suggested RPM: 1200 – 1500
Thickness: 1″
358
Diameter: 3″
Mounting Type: Grip Pad
Thickness: 1/4″
Thread: 5/8 x 11″
Max RPM: 3000
DA5816
Thread of Side 1: 5/16″ x 24″
Thread of Side 2: 5/8″ x 11″
SP5814
Thread of Side 1: Drill Chuck
Thread of Side 2: 5/8″ x 11″
2" Uro-Tec Soft White Finishing Foam Grip Pad
Loop diameter: 2.125″
Foam thickness: .750″
Our 3″ Curved Back Foam Pads have quality hook & loop material for fast easy pad loading with a domed face for improved buffing along with reinforced plastic backing. These pads are suitable for small buffing areas and are engineered for smooth performance.
Diameter: 3″
Mounting: Grip Pad
Material Type: Reticulated Polyester Foam
Material Color: Black
Application: Finishing
Foam PPI: 80
Thickness: 1″
Suggested RPM: 1200 – 1750
© Copyright 2019. All Rights Reserved. 
