Based on all-natural active ingredients. Tar-X dissolves stubborn tar, rubber, insect and adhesive residues without aggressive scrubbing, harmful chlorinated solvents, or other harsh chemicals. The fast acting formula is safe to use on most vehicle surfaces. Begins removing sticky contaminants on contact!
Sizes: 500mL, 1L, 5L
Removes Tar & Adhesive Residues
Fast-Acting, Natural Formula
CarPro So2Pure is a nano-scale TiO2 based photocatalytic automotive interior coating, which represents a huge leap forward in air purification technology. When exposed to light, So2Pure treated surfaces actively destroy even the toughest of odors and pollutants, leaving behind nothing but clean, fresh air. Those sensitive to allergens, traffic fumes, and other harsh odors will immediately appreciate the nasal serenity that So2Pure brings to vehicle interiors.
Sizes: 120mL, 1L
Air Purifying Coating
Kills Microbes, Bacteria, Mold Mildew, Nicotine, Pet, Child, and Chemical Odors on Contact
Lasts up to 1-Year on Vehicle Interiors
Photo Catalyst Air Purifier
FlyBy Forte is a brand new technologically advanced windshield coating. Development of Flyby Forte was heavily based on the latest and most advanced mobile phone anti-scratch protection. Our inorganic Nano-tech coating was specifically designed for EXTREME semi-permanent durability and long-term resistance to abrasion and chemicals. Flyby Forte was tested to over 40,000 real time wiper cleaning cycles, is UV stable, highly chemical resistant, and provides resistance to scratches and minor chips. Flyby Forte is the ULTIMATE in windshield and glass coatings!
Sizes: 15mL, Kit 15mL, 50mL
No degradation of the glass
Slide off at 50 Km/h
Up to 2 years durability
With CQuartz coatings this applicator allows you to change the applicator cloth as needed because you do not want to re-use them if you have allowed the liquid glass nano particles to crystalize on a used applicator suede.
Our new Gloss pad Orbital Foam feature a dual-density design, maintains optimum surface contact for even pressure. The polyurethane open cell foam ,ultra soft 90ppi density foam, ensure super gloss polishing in finishing stage, It has very little cut and will apply thin, even coats of waxes, sealants, and fine polishes as our Reflect polish. The concave shape increase stability allows improved control on curved panels and edges.
Spec. Info:
Beveled Edge for structural stability
Soft Open Cell Foam
Japanese Foam
Self Centering Hole in Center
Reveals a high gloss finish
Treat alloy wheels, faded plastic, and rubber trim with CQuartz DLUX to restore their rich, glossy finish, and give them the lasting hydrophobic nanotechnology protection these surfaces deserve. Applications like this withstand a lot of abuse so CQuartz DLUX was given a thicker film build than conventional CQuartz coatings, and a 50% silica content by volume. When applied to plastic and rubber trim, CQuartz DLUX helps to restore their gloss and color, and protect them from future fading. On painted, polished, or chromed wheels, CQuartz DLUX resists brake dust and road grime, eliminating the need for dedicated cleaners. Protects treated surfaces for up to 1-year between applications.
Sizes: 30mL
Nanotechnology Wheel & Trim Coating
Restores and Protects Faded Trim
Makes Wheels Easier to Clean
CarPro GLISS
The Next Generation Hyper Slick Top Coat
Make your own bliss? Slide through gloss into GLISS!
If I were to ask you what two factors fill every true car care enthusiast with happiness, what would you say? For most it is the gloss and incredible feeling of a perfect slick smooth and pure finish! THAT is the essence of GLISS?
With GLISS, CarPro brought new advances in nanotechnology to bare and designed an all-new hyper-smooth, hyper-glossy, and easy to apply ceramic nano coating that excels as a top-coat for all CQuartz coatings!
Utilizing modified long chain carbon fluorine polymers and enhanced nano-technology, GLISS provides increased resistance to, static buildup, dust retention, and many types of mineral and water stains!
This incredible next-gen coating serves multiple purposes and even excels as a stand-alone paint protection and enhancement system with a HYPER slick surface that will make your jaw drop!
Features:
Hyper SLICK and smooth
Next Generation Top Coat!
Also works great as a stand-alone Nano-coat!
Anti-static: Non-oily / resists dust retention
Adds thickness to your existing coat when used as a top coat
Enhances resistance to water spots and mineral stains
Extreme Hydrophobic effect
Enhances Gloss and life of any ceramic coating
DIRECTIONS:
Surface must be very dry per coating.
Drag one line of product across length of suede wrapped applicator.
Apply evenly across surface
Approximately 24? Sq (60cm2) at a time.
Add more product to applicator as needed to keep a wet, even
application.
Wait until white haze forms and immediately wipe all residues off using a microfiber.
If haze is left on too long then reapply and immediately wipe off.
If layering on top of itself, wait 1 hour between coats. If IR cured may repeat immediately.
Total cure time: 12 hours.
Tips for use as top coat on CQuartz:
May be applied 4 hours or longer after CQuartz.
If CQuartz was IR cured then only 1 hour is needed.
GLISS may flash slightly faster when applied over CQuartz.
Maintenance: Wash regularly with CarPro Reset or Ech2o.
Durability: 6-12 Months.
Storage : 15~ 35 deg.C ( 60 ~ 95 F.)
Important! If product is stored below this temp and becomes gel then it must be warmed up to reactivate.
A unique lambs wool and microfiber hybrid buffing pad with a patented design. A highly resilient, integrated air-cooling 3D structure acts as a breathing layer and combines pressure relief, thermoregulation and moisture management in one high tech composed, finished product. Developed from a pure New Zealand wool/microfiber woven material backed up with a backing pad which serves as a cooling interface between the surface and the machine. The functional layer of air space results in multiple benefits and ultimate polishing results. Target: cutting/compounding.
Spec Info
Size: 3/5 inches.
Material: wool+MF
Foam hardness: 600kpa.
Cells size: n/a
Foam density: 1.2kg/
Our CarPro Wool Cutting Pad has been redesigned with an even more durable and dense foam interlayer. It fits a 5? backing plate just right and tapers out to a 6? polishing face! It still utilizes the excellent short hair Japanese style wool design with a self centering hole to easily balance the pad while also aiding in a cooler pad and polishing surface while in use. Anyone who has studied their polishing pads after heavy use has found the center of the pad is nearly useless. By removing this portion of the pad we allow the surface to stay cooler while also providing a self centering hole to save time during pad mounting. This pad not only provides heavy cut but finishes down incredibly well for a heavy cut pad.
Spec. Info:
100% Wool polish face ? 1/4? Thick
Open Cell Foam Interlayer ? 3/4? Thick
Self Centering Hole in Center
Remove Swirls, Oxidation, and Scratches
The original Quartz-based coating that put the latest advances in Nanotechnology in the hands of detailing enthusiasts, CarPro CQuartz remains at the cutting edge of automotive protection technology. CQuartz bonds to paint, glass, metal, and plastic at a molecular level, effectively becoming a functional element of the vehicle?s surface. This coating?s hard hydrophobic, glass-like finish helps to protect your vehicle from weathering, UV-damage, industrial and organic fallout, acids, alkalines, light wash-marring and abrasion for up to 2-years whilst making it easier to clean than ever before. If you find maintaining your vehicle?s beauty a challenge, it?s time to experience where the CQuartz legend began?
Sizes: 10mL, 30mL, 50mL
Quartz Nanotechnology Coating
Complete and Lasting Protection
Suitable for Hot-Climates
High strength Rayon fiber ensures an even, fast cutting high gloss polishing option for removing scratches from glass via our Ceriglass polish. Offered in 3? and 5? units. Target: glass polishing.
Spec. Info:
Size: 3/5 inches.
Material: 100% Rayon
Foam hardness: 1600kpa.
Cells size: n/a
Foam density: 1.2kg/m3
© Copyright 2019. All Rights Reserved. 
